 |
| You can make a cyclocross hurdle really easily |
Firstly go shopping for some 40mm press fit waste pipe. Make sure you get press fit or else it will fall apart.
Shopping list
2x 2m by 40mm press fit waste pipe
2x 40mm 'T' section
2x 40mm 90° section
Cut one of the pipes into 4x 30 cm legs with a 45° angle at one end with a hacksaw. Then cut 2x 10cm extenders one for each end then assemble like so by pushing it all together. This will give you a hurdle of about 35cm if you want a higher/lower one then cut some longer/shorter extenders.
 |
| Like so! |
No comments:
Post a Comment